Torque Sensor vs Cadence Sensor: What Delivery Riders Should Know
Torque vs cadence sensor on an e-bike: how each works, how they feel, range, hills, repairs and cost, and which one makes sense for stop-and-go delivery work.
Pedal assist doesn't read your mind: a sensor near the cranks tells the motor when to help and how much. There are two main kinds, cadence sensors and torque sensors, and they make the same e-bike feel completely different. Online reviews almost always call the torque sensor "better". For a long delivery shift with a throttle, the answer is less obvious. Here's how each sensor works, how it feels, what it means for range, hills and repairs, and which one fits stop-and-go work.
The short answer
A cadence sensor detects that the pedals are turning and switches the motor on at the power of the assist level you picked. It doesn't care how hard you push. A torque sensor measures how hard you press the pedals and adds power in proportion, so the bike feels like a stronger version of your own legs.
A torque sensor feels more natural, responds instantly and is better for exercise and hills. A cadence sensor is simpler, cheaper to buy and to fix, and lets the motor do most of the work, which is why most delivery e-bikes with a throttle use one. If you want a workout, choose torque. If the bike is your work tool for 8–10 hours a day, a cadence sensor plus a throttle is a reasonable and common choice.
How a cadence sensor works
A cadence sensor is a ring of small magnets on the crank axle and a fixed sensor next to it. As the cranks turn, each magnet passes the sensor and sends a pulse. Once the controller counts enough pulses, it knows you're pedaling and switches the motor on.
- Assist levels are power steps. On a cadence bike, each pedal-assist (PAS) level gives a set share of the motor's power, or brings you up to a set speed. One reviewer's example: level 1 might be 20% of full power and level 5 the full 100%.
- There's a short delay. The controller waits for a few pulses before it starts the motor. Depending on the number of magnets and the controller, that's anywhere from a quarter to a full turn of the cranks, up to 1–2 seconds.
- It doesn't measure effort. Spinning the pedals lightly gives the same help as pushing hard. Riders call this "ghost pedaling".
Cadence sensors are simple and cheap to make, which is why most budget, mid-range and delivery e-bikes use them.
How a torque sensor works
A torque sensor uses a strain gauge, usually built into the bottom bracket (sometimes at the rear axle), that measures how hard your foot presses the pedal. The motor adds power in proportion to that force. At a low level the motor might match your effort one to one; at a high level it might add four times what you put in.
- Instant response. The motor reacts the moment you press the pedal, with almost no lag.
- Smooth control. Press lightly and you get a little help; stand on the pedals and you get a lot. You change assist levels less often.
- Very fast sensing. Bosch says its Performance Line CX motor reads pedal input more than 1,000 times per second.
Mid-drive motors from Bosch and Shimano use torque sensors, often combined with cadence and speed sensors. Torque sensors are now also moving into cheaper hub-motor bikes: Lectric's XP4 folding bike launched in 2025 with an in-house torque sensor at $999.
Torque vs cadence sensor: side by side
| Cadence sensor | Torque sensor | |
|---|---|---|
| What it measures | Whether the pedals turn | How hard you press |
| Feel | On/off, motor does the work | Natural, follows your effort |
| Start from a stop | Short lag, then a push | Instant |
| Exercise | Low unless you choose it | Built in |
| Hills | Change levels by hand | Help grows with your effort |
| Ghost pedaling | Possible | Not possible |
| Cost of the bike | Lower | Often a few hundred dollars more |
| Replacement part | About $20 for a basic sensor | Often $200 or more for the bottom bracket unit |
| Typical bikes | Budget, commuter, delivery | Premium, mid-drive, newer commuters |
How they feel in real riding
Starting from a light. A cadence bike gives you a brief pause and then a push, which some riders find abrupt if they pedal hard from a stop. A torque bike starts helping on the first press. On a delivery bike with a throttle this difference mostly disappears: you twist the throttle to pull away and pedal once you're rolling.
Tight spaces and traffic. A torque sensor is easier to control at walking pace, as long as the assist level isn't too high. A cadence sensor can overshoot in a tight turn if you spin the pedals at a high level, so drop to level 1 or 2 in crowded spots. Some riders find the opposite problem with torque bikes: at a high level, every pedal stroke can feel like a surge.
Long shifts. This is where a cadence sensor earns its place. It doesn't ask you to push harder to get more help: pick a level and the bike carries you. Reviewers describe cadence bikes as the right choice for riders who want the e-bike to do the heavy lifting, and that describes most couriers at hour seven of a shift.
Exercise. If you ride for fitness, choose torque: the bike can't help more than you're willing to work. Even so, any e-bike at a low level is moderate exercise. In a Miami University study, riders reached 62% of their maximum heart rate on pedal-assist level 1, compared with 66% on a regular bike.
Range and battery use
Reviewers say torque-sensor bikes typically get more range from the same battery, because you never get full power for light pedaling. But no reliable study puts a number on it, and the percentages you'll find on brand blogs come with no source. Lectric, which sells both types, puts it plainly: the sensor doesn't set the range by itself, and a torque bike ridden hard can use more battery than a cadence bike ridden gently.
What matters more for range: your assist level, how much you use the throttle, your weight and cargo, tire pressure and the cold. If range is your real problem, battery swapping or a spare battery beats any sensor.
Hills
A torque sensor is better on hills: the harder you push, the more help you get, without touching the buttons. On a cadence bike you switch to a higher assist level before the climb. With a 500–750 W hub motor and a throttle, city bridges and overpasses are not a problem with either sensor.
Repairs and reliability
Cadence sensors fail in simple ways: no assist, assist cutting in and out, or a pedal-sensor error on the display. Usual causes:
- the gap between the magnet ring and the sensor is off (it's usually 1–3 mm);
- dirt, grease or a cracked magnet ring;
- a wet or corroded connector.
Most of these are a quick fix: wipe the sensor clean, realign it, dry the plug. Don't use a pressure washer near the cranks. A basic cadence sensor costs around $20.
Torque sensors are sealed inside the bottom bracket and rarely get dirty, but after a crash or a software update they can lose calibration, which shows up as weak or uneven assist. They're recalibrated in the brand's app or at a dealer, not by opening the bottom bracket. If the sensor itself fails, the replacement part can cost $200 or more.
Error codes for the pedal sensor are different on every brand. Our guide to e-bike error codes explains the common ones, and pedal assist not working walks through the checks.
What about throttles and the law?
The sensor doesn't change an e-bike's legal class: the throttle and the top speed do. In most states, Class 1 is pedal-assist only to 20 mph, Class 2 adds a throttle to 20 mph, and Class 3 is pedal-assist to 28 mph. New York defines Class 3 differently: up to 25 mph, throttle allowed, and only in New York City. All classes are capped at 750 W, and NYC has a 15 mph citywide speed limit for e-bikes. A throttle works the same way with either sensor. More on how it works: how an electric bike throttle works.
Why delivery e-bikes use cadence sensors
Most delivery and rental e-bikes, including ours, pair a cadence sensor with a throttle and a rear hub motor. The reasons are practical:
- The throttle covers the weak spot. The cadence sensor's start-up lag doesn't matter when you pull away on the throttle.
- The bike does the work. On a long shift you want steady help that doesn't depend on how tired your legs are.
- Cheap, quick repairs. A cadence sensor is a $20 part that a mechanic can clean, realign or swap in minutes. A bike that's off the road costs a courier a day of earnings.
It fits with the motor choice too. Our mid-drive vs hub motor guide explains why delivery bikes use rear hub motors.
What sensor do Whizz e-bikes use?
All Whizz e-bikes, the Storm-2, Thunder and Monster, use a cadence sensor, five levels of pedal assist and a throttle. On the Storm-2 you switch the assist level with a short press of the UP or DOWN button on the display; holding DOWN for 2 seconds turns on walk assist, which helps you push the bike at walking speed.
Frequently asked questions
Is a torque sensor worth it?
Yes, if you ride for fitness, climb a lot of hills or want the most natural feel. If you mostly use the throttle and want the bike to do the work, as most delivery riders do, a cadence sensor does the job for less money.
Which uses less battery, a torque or cadence sensor?
Usually a torque sensor, because it doesn't give full power for light pedaling. But your assist level, throttle use, cargo weight and the cold matter more than the sensor. Treat claims of a fixed percentage gain with caution.
Can you add a torque sensor to a cadence e-bike?
Only if the bike's controller accepts a torque signal, and the new bottom bracket must fit the frame. On most cadence bikes it means a new controller too. Changing the electrical system can also void the bike's UL 2849 certification.
Which sensor is better for exercise?
A torque sensor. The help grows with your effort, so you can't coast on light pedaling. Any e-bike ridden at a low assist level is still moderate exercise.
Can I switch between torque and cadence mode?
On some bikes, yes. Lectric's XPress2 and XP Trike2 750 let you choose in the settings, and Aventon has a "Sensor Switch" update for some models. Most bikes have only one type.
The bottom line
A torque sensor is the better pedal-assist sensor for most recreational riders: it's instant, natural and rewards your effort. A cadence sensor is the better fit when the e-bike is a work tool with a throttle: steady help on a tired shift, simple to fix and cheap to replace. Pick the sensor for the riding you actually do.
Ride a delivery e-bike set up for full shifts. The Whizz Storm-2 and Thunder have a throttle, five assist levels and a rear hub motor, with 24/7 battery swapping in New York, Philadelphia and Washington DC, on Rent-to-Own with no credit check. See Whizz e-bikes.
Sensor specs and prices were checked on November 16, 2026. Manufacturers update their bikes often; confirm current specs before you buy.